Customer Service (844) 278-6944

Floriani's No Show Nylon Mesh Stabilizer (Fusible)

More Views

Floriani's No Show Nylon Mesh Stabilizer (Fusible)

Be the first to review this product

Product Name Price Qty
Floriani No Show Fusible Mesh - White - 12" x 10 yds.
$26.99
Floriani No Show Fusible Mesh - White - 15" x 10 yds.
$33.99
Floriani No Show Fusible Mesh - White - 20" x 10 yds.
$42.99
Floriani No Show Fusible Mesh - Beige - 12" x 10 yds.
$36.99
Floriani No Show Fusible Mesh - Beige - 15" x 10 yds.
$41.99
Floriani No Show Fusible Mesh - Beige - 20" x 10 yds.
$46.99

Floriani's No Show Nylon Mesh Stabilizer (Fusible)

Floriani No Show Nylon Mesh Fusible is a 1.5 oz sheer cutaway available in black, white and beige. Unlike traditional cutaway, this product will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments. The uniqueness of the fusible version makes this product a staple in your embroidery stabilizers. There is no need for basting or messy spray adhesives which leave a residue on the needle and machine when using this product. By fusing the stabilizer to the back of the garment, we are more successful in hooping and do not stretch the garment out of shape. The stabilizer is temporarily attached to the entire area where the embroidery will be stitched unlike spray adhesives which only "spot" tack and allow shifting of the fabric. This product is also available in a non-fusible version.

  • Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4" x 4").
  • Use the fusible version to cover up scratchy stitches on the back of the embroidery.
  • Will not shadow through on light weight cottons and knits.

To use Floriani No show Nylon Mesh Fusible:

  1. Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
  2. Fuse the entire piece of the stabilizer on to the back of the garment using a low to medium temp, dry iron. (260°F, silk setting) When pressing the stabilizer on to the garment, the iron surface should touch the fabric, not the stabilizer.
  3. Hoop the garment and place the embroidery frame on to the machine. Complete the layout and centering of the design.
  4. Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
  5. After the design is complete, remove the garment from the machine and embroidery hoop. To remove the No Show Mesh Fusible, re-heat the stabilizer and peel it back gently to the design and trim.
  6. *Tip! If embroidering knit, don't forget to use topping!
  7. *Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the fusible mesh, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness

No

Videos

Testimonials

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

  • Free Classes with New Sewing Machine Purchases
  • On-Site Expert Repairs
  • Meissner Complete Protection Plan
  • Largest Showroom on the West Coast
  • Low Price Guarantee
Find Out More Pink Go Arrow

Family Owned & Operated

Since 1930

an image of two old black and white photographs
 
Find Out More Pink Go Arrow

Free

Shipping

On Orders Over
$100 Free Shipping on Orders Over $100

Find Out More Pink Go Arrow