Customer Service (844) 278-6944

Floriani Toppings - Water Soluble and Heat N Gone

More Views

Floriani Toppings - Water Soluble and Heat N Gone

Be the first to review this product

Product Name Price Qty
Floriani Heat N Gone Topping - 10" x 10 yds.
$12.99
Floriani Heat N Gone Topping - 10" x 25 yds.
$29.99
Floriani Heat N Gone Topping - 20" x 10 yds.
$24.99
Floriani Water Soluble Topping - 10" x 10 yds.
$16.99
Floriani Water Soluble Topping - 10" x 25 yds.
$32.99
Floriani Water Soluble Topping - 20" x 10 yds.
$31.99

Floriani Toppings - Water Soluble and Heat N Gone

Heat N Gone

Heat N Gone® is a unique topping/stabilizer that is removed with the touch of a dry iron or heat press. Use on high pile and textured fabrics such as towels, knits and velvet to keep your stitching elevated and smooth. It is also ideal for fabrics that cannot withstand moisture such as delicate raw silk, pashmina and wool. Great when giving a gift and you need instant stabilizer removal! Use only on fabrics that can withstand the direct touch of an iron.

  • Clear and Easy to see through
  • Easy to remove
  • Embossed backside prevents curling and shifting
  • Perfect for fabrics that can't be wet such as velvet, wool, satin, etc.
  • Trace intricate quilt patterns onto Heat N Gone® for an easy guide when free motion quilting or thread painting.
  • Prevents loops from sneaking back through on high pile fabrics such as towels and terry cloth.

To use as a topping:

  1. Place a piece of Heat N Gone® on the surface of the hooped item, bumpy side touching the fabric, and secure the outer corners with pins or tape to prevent curling.
  2. Complete the embroidery design.
  3. Important! Tear away/remove as much of the Heat N Gone® as possible.
  4. Using a low to medium temperature, place a heated iron tip directly on top of the garment to remove the excess stabilizer.

To use as a stabilizer:

  1. Place a piece of Heat N Gone® within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer perimeter of the hoop and place the bumpy side of the stabilizer against the fabric.
  2. Embroider the design.
  3. Important! Tear away as much of the Heat N Gone® as possible.
  4. Place a heated iron directly on top of the garment to remove the excess stabilizer. Be sure the iron temp is set to low/medium.

Tips for removal:

  • Always test stabilizer removal on a scrap of similar fabric before beginning your projects!
  • To clean your iron of any residue, heat the iron to its highest temperature and move the irons surface back and forth over a wet towel firmly. Iron cleaners such as Dritz and Niagra work also.
  • Stainless Steel Iron recommended for best stabilizer removal results.
  • Remember to use a low to medium setting on your iron to remove the bits of Heat N Gone from around the design – a high temperature will liquefy the product and make it melt back into the stitching.

Water Soluble

Floriani Water Soluble Topping provides a smooth stitching surface for your machine. When the machine has to maneuver around loops and grooves in the fabric, it will affect your stitch quality. This product is completely water soluble and provides fantastic stability on the surface of your fabric by keeping your stitches elevated.

  • Use on high pile fabrics such as fleece, terry and towels
  • Use on textured fabrics such as corduroy, seer sucker, and velvet.
  • Use on knits and lycra/spandex.
  • Use to shield some fabrics from hoop burn
  • Once opened, keep Floriani Water Soluble Topping sealed in an airtight ziplock type bag or Tupperware type container.

To use Floriani Water Soluble Topping:

  1. Place the stabilized garment in the hoop and secure the hoop on the machine. Complete the centering and alignment of the design.
  2. Cut a piece of Floriani Topping slightly larger than the size of the design and place it on top of the fabric.
  3. Secure the Topping to the surface of the garment with scotch tape or by moistening the corners slightly and then sticking it down to the garment or the inside edges of the hoop.
  4. Complete the embroidery.
  5. Tear away as much of the topping as possible. Remove any remnants by moistening with a damp cloth, Q-Tip or steam from an iron.
    *Tip - If your embroidery design is a satin stitch type embroidery and/or doesn't have an outline, use a wet Q-Tip to go around the edge of the design before tearing any of the Topping away. This will prevent any distortion of the stitching.

No

Videos

Testimonials

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

  • Free Classes with New Sewing Machine Purchases
  • On-Site Expert Repairs
  • Meissner Complete Protection Plan
  • Largest Showroom on the West Coast
  • Low Price Guarantee
Find Out More Pink Go Arrow

Family Owned & Operated

Since 1930

an image of two old black and white photographs
 
Find Out More Pink Go Arrow

Free

Shipping

On Orders Over
$100 Free Shipping on Orders Over $100

Find Out More Pink Go Arrow